Hills Dual-Geometry Wire |
||||
The HILLS Dual-Geometry arch wire is the optimal wire for "Sliding mechanics" and "anterior retraction" while maintaining nearly perfect torque control. |
Full sized square anterior section fills the slot for optimal torque control |
Round posterior section is polished to minimize friction |
Hills Dual-Geometry Wire for Posterior Translation
Intended specifically for posterior translation, this design features a slightly larger round posterior diameter. The larger posterior cross-section enhances rotational control and facilitates precise alignment of the roots during tooth translation. |
Slightly larger round posterior section enhances rotational control and facilitates root parallelism during tooth translation. |
Slot Size |
Hills Posterior Translation - Dimensions |
Arch |
Arch Size |
.022 |
.021 x .021 x .020 x 38 mm Anterior Length |
Upper |
Large |
.021 x .021 x .020 x 28 mm Anterior Length |
Lower |
||
.018 |
.018 x .018 x .018 x 38 mm Anterior Length |
Upper |
Large |
.018 x .018 x .018 x 28 mm Anterior Length |
Lower |
Hills Dual-Geometry Wire for Anterior Retraction
Intended specifically for anterior retraction, this design features a slightly undersized round posterior diameter. The reduced posterior cross section minimizes contact between the SPEED Spring Clip and the archwire, reducing friction, and ensuring optimal efficiency of tooth movement during space closure and retraction. |
Slightly undersized posterior section minimizes frictional resistance facilitating optimal efficiency during space closure and anterior retraction. |
Slot Size |
Hills Anterior Retraction- Dimensions |
Arch |
Arch Size |
.022 |
.021 x .021 x .018 x 38 mm Anterior Length |
Upper |
Large |
.021 x .021 x .018 x 28 mm Anterior Length |
Lower |
||
.018 |
.018 x .018 x .017 x 38 mm Anterior Length |
Upper |
Large |
.018 x .018 x .017 x 28 mm Anterior Length |
Lower |